Portable charcoal kiln CK "UGOLKOV"                             

The development of this kiln was based on CK "Bezzolnaya", which has been produced by our company since 2004. For years well-tested construction GUARANTEES high qualitative and quantitative indicators of derived charcoal.

The Charcoal Kiln "EURO"

The main advantages of this kiln are environmental safety and high efficiency comparing to the relatively small size. CK "EURO" is used for lump timber waste, soft and hard fuelwood processing in order to obtain charcoal used for industrial needs. This kiln can be used in different forms of ownership dealing with procurement and processing of timber.
The kiln is handled by 2-3 people; the productivity of the kiln is 45 tones of the high-quality charcoal per month. The furnace is 100% safe. It can be perfectly used for woodworking enterprises to process waste products into charcoal. Moreover the kiln is able to process wood briquettes into charcoal, which will have much better characteristics. At the same time fuel briquette does not change its form and structure, but because of the construction trucks, while unloading the number of drop-out rate is less than 5%!

CK "Bezzolnaja"
Developed and produced by GREENPOWER since 2004

The charcoal kiln is used for recycling of non-commodity wood and wood processing waste products in order to obtain charcoal. Due to the overall size and consistency of construction the kiln can be easily transported which provides production mobility and opportunity to use it in hard-to-get areas. Branches of kiln application are: small and big enterprises dealing with wood procurement and processing, within and outside the city; forestry; enterprises dealing with sanitary cutting down. The main advantage of CK «Bezzolnaya» is an opportunity to process fine pieces of firm and soft breeds of wood, i.e. charcoal remains practically the same size, as the loaded raw materials!

Heat recovery boiler converts the excess heat generated by the operation of the furnace charcoal kiln UP "EURO" in the heat. The boiler can also operate on natural gas and wood. Thermal power boiler for the 1st oven can reach 50kW.

The charcoal kiln "Vuglinka" is used for utilization of wood processing waste products of both soft- and hardwood with humidity not exceeding 20% in order to obtain charcoal. Branches of application of this kiln are small and big enterprises dealing with wood processing, located both within and outside the city.