The charcoal kiln "Vuglinka" is used for utilization of wood processing waste products of both soft- and hardwood with humidity not exceeding 20% in order to obtain charcoal. Branches of application of this kiln are small and big enterprises dealing with wood processing, located both within and outside the city.

This installation operates on the principle of thermal heating of carbon-bearing raw material with no access of oxygen (pyrolysis) and by using the combined way of heating. High efficiency, small labour input and insignificant expenses for operation of equipment ensure low cost price of coal and fast recoupment of "Vuglinka" installation. The construction provides an opportunity to make up to 2 cycles a day! During manufacture fraction less than 20 mm., does not exceed 2-3 %, from the common output of charcoal. The kiln can be easily transported. It hardly releases any smoke while operating as pyrolysis gas is burned up in the kiln. Both soft and hardwood (yield factor see in tab.) with humidity not exceeding 20% can be used as raw materials for this kiln. The recommended sizes of wood used as raw material are — length - 10-2000 mm., width - 10-150 mm.

The name of parameter	Value of parameter
The name of equipment	CK-1	CK-2
Productivity, raw material: an oak, humidity: 25-30 %, not less a ton/cycle	0,25-0,3*	-----*
Effective volume of the pyrolysis chamber, m3	2,5	-----
Volume of raw material for pyrolysis, m3	1,5-2	-----
Duration of a labour cycle, h	20-30	-----
The charge of fire wood for burning, m3	0,1-0,2	-----
Cost in US dollars, inclusive of VAT	removed from production	-----