1.png
MAINPRODUCTSCUSTOMERSCONTACTSARTICLESLINKS
Waste-heat boiler for pyrolysis gas
Pyrolutilizboiler

Heat recovery boiler converts the excess heat generated by the operation of the furnace charcoal kiln UP "EURO" in the heat. The boiler can also operate on natural gas and wood. Thermal power boiler for the 1st oven can reach 50kW.

The waste-heat boiler can be used for drying chambers, working, office and living areas, greenhouse complexes, etc. Moreover with the nowadays’ prices for raw material resources (gas, coal, heat energy, liquid fuel) this boiler will pay its way in 1-2 seasons and will make you independent from external sources of energy.


Technical characteristics of the installation
The name of parameter Unit Value
Nominal heat power kW by 50
Firewood consumption (given temperature of coolant is 60°C) m³/day 1-2
Area of heated spaces by 3500
Overall dimensions, length × width × height mm 1645×1630×1180
Mass kg 850
Pyrolutilizboiler
 
CK “EURO” electricity box flange on the heating chamber (pyrolysis gas delivery) weighing batcher (packing line block) fire chamber in operation using firelogs CK «EURO» 56 CK «EURO» (2) in processing department (2010) The doors of fire chamber. The temperature is 40ºС while CK is in operation. CK «EURO» (Bulgaria, May 2011) Evaporation during the process of timber drying convertible overpass
Рейтинг@Mail.ru