Portable charcoal kiln CK "UGOLKOV"
The development of this kiln was based on CK "Bezzolnaya", which has been produced by our company since 2004. For years well-tested construction GUARANTEES high qualitative and quantitative indicators of derived charcoal.
|
|
Read more...
|
|
The Charcoal Kiln "EURO"
The main advantages of this kiln are environmental safety and high efficiency comparing to the relatively small size. CK "EURO" is used for lump timber waste, soft and hard fuelwood processing in order to obtain charcoal used for industrial needs. This kiln can be used in different forms of ownership dealing with procurement and processing of timber.
The kiln is handled by 2-3 people; the productivity of the kiln is 45 tones of the high-quality charcoal per month. The furnace is 100% safe. It can be perfectly used for woodworking enterprises to process waste products into charcoal. Moreover the kiln is able to process wood briquettes into charcoal, which will have much better characteristics. At the same time fuel briquette does not change its form and structure, but because of the construction trucks, while unloading the number of drop-out rate is less than 5%!
|
|
Read more...
|
CK "Bezzolnaja"
Developed and produced by GREENPOWER since 2004
The charcoal kiln is used for recycling of non-commodity wood and wood processing waste products in order to obtain charcoal. Due to the overall size and consistency of construction the kiln can be easily transported which provides production mobility and opportunity to use it in hard-to-get areas. Branches of kiln application are: small and big enterprises dealing with wood procurement and processing, within and outside the city; forestry; enterprises dealing with sanitary cutting down. The main advantage of CK «Bezzolnaya» is an opportunity to process fine pieces of firm and soft breeds of wood, i.e. charcoal remains practically the same size, as the loaded raw materials!
|
|
Read more...
|
Line for charcoal packing allows sorting and packing of charcoal at minimum physical force. The construction can include batcher for charcoal from 1 to 5 kg, system of aspiration which guarantees the cleanliness of production premises, transporters and other units which will make the work of the maintenance staff much easier.
|
|
Read more...
|
Heat recovery boiler converts the excess heat generated by the operation of the furnace charcoal kiln UP "EURO" in the heat. The boiler can also operate on natural gas and wood. Thermal power boiler for the 1st oven can reach 50kW.
|
|
Read more...
|
|
The charcoal kiln "Vuglinka" is used for utilization of wood processing waste products of both soft- and hardwood with humidity not exceeding 20% in order to obtain charcoal. Branches of application of this kiln are small and big enterprises dealing with wood processing, located both within and outside the city.
|
|
Read more...
|
|
Charcoal kiln CK-100 "Kudesnitsa" refers to stationary charcoal kilns with replaceable retorts and the way of wood heating through the wall. Kilns of the given type have a high output of charcoal (35 %) and allow making charcoal with the contents of carbon up to 90 %. Charcoal made on CK-100 "Kudesnitsa" has high mechanical durability. Owing to a unique design, the kiln is ecologically safe for an environment. Productivity of the kiln depending on season and used wood is 80-100 t\month.
|
|
Read more...
|
|
Log Splitter is used for firewood stocking in bulk and average amounts. It can be used both for manufacture and personal needs. Splitting wedge is forced in the wood with the help of the plunger or truck is pressed into the rigid wedges or blades.
|
|
Read more...
|
|
 All that is necessary for packing charcoal, we offer for you:
- Line for automatic charcoal packing
- Paper bags for charcoal packing
- Manual sack stitching machines
- Electronic floor scales
- Conveyor and lifts
|
|
Read more...
|
|
In order to provide denser piling of raw materials into the retort the tires can be cut, however with the more dense piling the process becomes longer. For example when loading 0,5 t of tires the cycle makes 10-11 hours, and while loading 0,8 t of tires the cycle makes 16 hours. Tire cutting process is illustrated on the video and goes according to the following algorithm: at first tire bead is cut and then the tire is carved with the help of special scissors for tire cutting.
Whole or cut pieces of tires are loaded into retort (basket) after that the retort is put into the pyrolysis installation (reactor) with the help of telpher or other lifting mechanism. There it is heated up to 500 °C with no access of oxygen (pyrolysis process).
|
|
Read more...
|
|
Charcoal is used as a fuel since ancient times but its production was decreased when natural gas, electricity and oil became more common.
Its unique characteristics make it possible to use it in various spheres. Not so long ago it was impossible to see it in everyday life and now it attracts attention again.
It is suitable for braziers, fireplaces, barbeque, and it doesn't give any fume so it is ecologically friendly product.
Charcoal in industry:
- non-ferrous metals (eg, for aluminum, boron, etc.);
- pure silicon production, which is used to produce semiconductor;
- chemical industry;
- metallurgy, such as the reductant (in charcoal high carbon content);
- production of glass, crystal glass, paints, electrodes, plastic.
|
|
Read more...
|
|
In today's economy energy sources, as well as minimization of industrial waste have a significant influence on the product price. We offer installations for the integrated and optimal plant origin waste conversion into useful products.
The problem of heating is becoming increasingly important both for existing businesses, and for just cause. Comfortable working conditions, energy savings and the stability of the enterprise depend on the efficiency of the heating system. And with the current increase in prices for natural gas interest in a highly efficient boiler equipment has increased significantly.
Our equipment works on the waste of plant origin and helps not only to recycle waste products, but also extract extra profits by processing them into thermal energy.
|
|
Подробнее...
|
|
|
|
|
|
|
